[NHR] Erador

"Бурлак" Evo2 (Burlak are the barge haulers in Russia (maybe on Volga river only). See the art with its history: https://artsandculture.google.com/asset/barge-haulers-on-the-volga/WAG9_bL0sypwYQ?hl=en) Speed & Capacity at all cost ship. Not maneuverable. Expensive. 23 Rings. Lukium ore used for wet parameters. Google Drive link: https://drive.google.com/file/d/1NjUjAumK-vfNVT2F-_CXnQWGQOfyUTKm/view?usp=sharing Instructions: - Simple Gen On&Off button. - Some buttons are hidden. See the image with the panel, red circles are the location of the buttons. - Backward thrusters can be turned off for speed increase (theoretically). - Has 2 passenger seats. - Has 2 144x144 placeholders for your Faction banner (or any other you would like). - Panel can be raised up for better visibility. Button is on the panel's bottom. If you have desyncs and movable parts often get fallen - you can bolt it. - Won't fit Origin's designer, so to build it you will need a player station or build with the instructions below. (It spawns/despawns normally on Origin). How to build on Origin: In two words: you are going to remove the tail to shorten the ship, save blueprint and then build it. The assemble it real world exactly as on the original Blueprint. You can always LOOK at the Original blueprint to have a reference. - In SSC, remove 3 rings and Nozzle on the end. (See Image 1). Also, the beams needs to be copied and then removed too (The red beam should not be touched. It will be used as a snap point later) - Place the copied beam parts somewhere on the ship, so it can be easily detached when built. - Save the blueprint and build it. - When spawned, place 4 beam parts on their spot. You need to use Red beam to snap it. - After that, place 12 ring sections one by one and bolt them. The bolt pattern for a single section: 4 bolts on top, 4 bolts on bottom (see original blueprint) - Place and bolt the nozzle. You will need 3 bolts to every bolting area. (See Image 2)